Teletronics TT 2400 - Manual (Page 37)


Channel 153 = 5.745 – 5.765

Channel 157 = 5.765 – 5.785

Channel 161 = 5.785 – 5.805

Channel 165 = 5.805 – 5.825
Special Atheros Turbo Mode Channels
*Use this setting only when both side of the wireless connection is using the Atheros chipset. The radio will combine 2
free channels for the wireless transmission to double the bandwidth.

Channel 42 = 5.210

Channel 50 = 5.250

Channel 58 = 5.290

Channel 152 = 5.760

Channel 160 = 5.800
WDS
Enable WDS
The Wireless Distribution System (Repeater) functionality enables this AP to support wireless traffic to other WDS relay
Access Points. In other words it is like bridging between the 2 access points in order to extend the reach of the
wireless network beyond that of a single AP can cover. By enabling the WDS feature the distance of wireless
networking is thus extended for authenticated client devices that can roam from this Access Point to another.
WDS can extend the reach of your network into areas where cabling might be too difficult.