Teletronics TT 2400 - Manual (Page 28)

This is the user name that you must type when logging into the web interface.
Administrator Password
This is the password that you must type when logging into the web interface. You must enter the same
password into both boxes, for confirmation.
Syslog
Syslog Enabled
Option to enable or disable Syslog support.
Syslog Daemon Server
The Syslog server IP address input box.
Device Control
This section has functions that will allow the TT5800/TT2400 to Reboot and Reset the system configuration to factory
default.
Firmware Upgrade
This section allows the TT5800/TT2400 firmware to be upgraded or changed directly from the web interface. Click on
the Browse bottom to select a file from the host machine.
Register
The TT5800/TT2400 has implemented a hardware modification authorization process to prevent fraudulent hardware
from other manufacturers. This will require any hardware change on the radio card used on the TT5800/TT2400 to
input a serial code generated based on each unique MAC address. Please contact Teletronics Support to a pickup a
valid serial number to deactivate the pre-registration protection after a radio card swap. If no valid serial code has been
input into the unit, features such as SSID and Wireless Channel will be locked down.