Product identification, Unpacking, Product features – Desa VTDMV24PA User Manual

Page 5: Installation

Advertising
background image

www.desatech.com

114926-01B

5

PRODUCT

IDENTIFICATION

WARNING: Failure to posi-

tion the parts in accordance

with these diagrams or failure

to use only parts specifically

approved with this appliance

may result in property damage

or personal injury.

Figure 1 - Product Identification

Log Set
Assembly

Piezo
Ignitor

Control
Knobs

Chassis
Assembly

Ember Pod

UNPACKING

CAUTION: Do not remove the

data plates from the grate as-

sembly. The data plates contain

important warranty and safety

information.

1. Remove log set assembly from carton.

IMPORTANT:

Do not pick up assembly by

logs. This could damage the unit. Always

handle assembly by grate.

2. Remove all protective packaging applied to log

set for shipment.

3. Check all items for any shipping damage. If

damaged, promptly inform dealer where you

bought appliance.

PRODUCT FEATURES

This unitized gas log set is tested and approved to

ANSIZ21.60-2003 and CSA 2.2-2003 as a vented

decorative appliance.
This unit has a piezo ignitor. This system requires

no matches, batteries or other sources to light ap-

pliance.

INSTALLATION

WARNING: A qualified ser-

vice person must install heater.

Follow all local codes.

WARNING: Before installing

in a solid fuel burning fireplace,

the chimney flue and firebox

must be cleaned of soot, creo-

sote, ashes and loose paint by a

qualified chimney cleaner. Creo-

sote will ignite if highly heated. A

dirty chimney flue may create and

distribute soot within the house.

Inspect chimney flue for damage.

If damaged, repair flue damper

before operating appliance.

CAUTION: This heater creates

warm air currents. These currents

move heat to wall surfaces next

to heater. Installing heater next

to vinyl or cloth wall coverings or

operating heater where impurities

(such as, but not limited to, to-

bacco smoke, aromatic candles,

cleaning fluids, oil or kerosene

lamps, etc.) in the air exist, may

discolor walls or cause odors.

NOTICE: Installation, service and

repair of this appliance must be

performed by a qualified installer,

service agency, company or

gas supplier experienced with

this type of gas appliance. Only

factory authorized components

listed in these instructions may

be used in accordance with the

manufacturer's instructions and

all codes and requirements of

the authority having jurisdiction.

Any modifications to or use of

unauthorized components or

accessory items will void the

manufacturer’s warranty and may

result in a hazardous condition.

Advertising
This manual is related to the following products: