Thinklogical Velocitykvm T-4200 Chassis Manual - Manual (Page 13)

®
T-4200 Chassis, Rev. A
13 September 2011
Display
Modifiable Description
*Video
Video Tx 1 cnt.
NO Video IN 1 pixel sample clock (TX)
Video Rx 1 cnt. NO Video IN 1 pixel sample clock (RX)
Video Tx 2 cnt. NO Video IN 2 pixel sample clock (TX)
Video Rx 2 cnt. NO Video IN 2 pixel sample clock (RX)
TX 1 Stream Info NO Video Channel 1 ID
TX 2 Stream Info NO Video Channel 2 ID
PropConst YES Factory default setting for debug
IntegConst YES Factory default setting for debug
3.2 Saving Changes
Save video configurations so that after powering up, the device can recall customer
video settings.
Using the down arrow, scroll down to
*System as shown below.
Using the right arrow, scroll right until
Store Values is displayed as shown below, then press enter.
Using the up arrow or down arrow scroll until
Yes appears as shown below. Then press enter.
*System
Thinklogical
Velocity Tx VXX.XX
Store Values
Yes/No.= No