Thinklogical Router SNMP Traps - Manual (Page 9)

Vx/Hdx/Mx Router SNMP Traps
Events
• TX Fault Begin and Clear
An SFP module has entered into the TX Fault state (Begin) or has exited this state (Clear). This
state is determined by the TxFault status bit located in the SFP diagnostic registers.
Objects:
1: sfpLabel
2: sysContact
3: sysDescr
4: sysLocation
5: sysName
• LOS Begin and Clear
An SFP module has entered into the LOS state (Begin) or has exited this state (Clear). This state
is determined by the LOS status bit located in the SFP diagnostic registers.
This trap is not conditioned by the switch matrix, but is the LOS status of the SFP. For example,
this trap will be generated when a fiber is removed from the SFP or when a existing connection is
broken by the switch matrix.
Objects:
1: sfpLabel
2: sysContact
3: sysDescr
4: sysLocation
5: sysName
• SFP Removed or Inserted
An SFP module has been removed or inserted.
Objects:
1: sfpLabel
2: sysContact
3: sysDescr
4: sysLocation
5: sysName
Mar 19, 2014 V4.2-5 8/13