Tri Tool 214B ID Track Module - Manual (Page 15)

15
Model 214B ID Tracking Module (IDTM) Kit
92-1504 : Orig. 140627
MAINTENANCE
RECOMMENDED MAINTENACE SCHEDULE
Daily after operation
Wipe the unit down and spray with rust preventative under severe humidity
conditions.
Visually inspect for loose screws, missing screws, damage, etc.
Every 20 hours of actual operation
Disassemble the unit and wipe clean and lubricate the Slide Rails with a light
film of lubricant.
Excess lubricant will collect grit and/or chips and tend to cause
jamming and/or damage to the Slide Rails.
STORAGE
If the ID Tracking Module is to be stored or if it will be out of service for 30 days
or more, it should be thoroughly cleaned, lubricated and sprayed with a rust
preventative prior to storage.