Tri Tool 765RVC Hyrdaulic Power Supply - Manual (Page 20)

20
TRI TOOL INC.
92-0306 : Rev. 140715
DANGER:
WARNING:
OPERATION
Keep the control box door closed. There IS 240 VAC, 380 VAC or 460 VAC
within the system.
Connect the Operator’s Pendant to the Model 765 RVC
Be sure the electrical power has been disconnected from the Hydraulic Power
Supply before attempting to connect or disconnect the Operator’s Pendant.
Failure to do so will cause the fuse in the electrical box to blow as well as
possibly damage the connector to the Operator’s Pendant.
Before any operation takes place, inspect the quick disconnects for contami-
nation and clean if required when connecting hydraulic hoses.
Verify that the slide lock sleeves on the quick disconnects are fully engaged.
Model 765 RVC
Tank Filler Cap
Hydraulic
Return
Line
Hydraulic
Pressure
Line
Model 765 RVC
Hydraulic Power Supply
Operator's Pendant