Tri Tool 765RVC Hyrdaulic Power Supply - Manual (Page 6)

6
TRI TOOL INC.
92-0306 : Rev. 140715
NOTE:
GENERAL DESCRIPTION
The Model 765 RVC (P/N 01-0765) Remote Volume Control Hydraulic Power Supply
is a variable-volume, 0 (0 L/s) to 15 (.94 L/s) gpm, pressure-responsive, 0 (0 kPa)
to 1800 psi (12410 kPa), reversible-flow power unit. The Model 765 RVC is used
for supplying hydraulic power to cutting and weld end preparation pipe lathes with
integral hydraulic motors.
Pump capacity is actually 0 gpm (0 L/s) to 22 gpm (10 L/s), however, operat-
ing pressure must be limited to 1000 psi (6895 kPa) at flows over 15 gpm (.94
L/s) to avoid overloading the motor.
The Pendant provides stop, start, volume control, and forward/neutral/reverse flow
direction control.
The Pendant allows operation up to 200’ (61 m) away from the power supply by
addition of a Pendant Extension Cable and Hydraulic Hoses.
For portability, the power supply is integrated into a cart frame with wheels and
casters.