Triplett WireMaster Coax BNC – PN: 3274 - Manual (Page 11)

11
Continuity Testing
The WireMaster Coax can be used as an audible and visual Continuity tester. To use
this feature, the user will need to purchase or make a simple BNC / Clip Lead adaptor.
(Triplett PN: 79-792)
Connect the adaptor cable to the BNC on the WireMaster Coax. When a circuit with
Continuity is connected between the adaptor’s clip leads, the product’s SHORT / CON-
TINUITY LED will light and the beeper will sound.
Intermittent Connections
The WireMaster Coax performs tests in real-time. That is, it is continuously testing the
target cable for the presence of a Remote (some products only perform a momentary
test). When a cable is suspected of having an intermittent connection, a Remote can be
connected to one end of the cable, and the WireMaster Coax connected to the opposite
end of the cable. The appropriate numbered ID LED should light on the WireMaster
Coax. Flex the cable at its connectors and along its length (may require 2 people) while
observing the ID LED on the WireMaster Coax. If an intermittent connection is found,
the ID LED will flicker or change value (like to SHORT or OPEN).
Included Items
The following items are included with the WireMaster Coax
Remote 1 ……………………………... Triplett PN: 3274-1
Remote 2 ……………………………... Triplett PN: 3274-2
Remote 3 ……………………………... Triplett PN: 3274-3
Remote 4 ……………………………... Triplett PN: 3274-4
Remote 5 ……………………………... Triplett PN: 3274-5
Remote 6 ………………………….….. Triplett PN: 3274-6
Remote 7 ………………………….….. Triplett PN: 3274-7
Remote 8 ……………………………... Triplett PN: 3274-8
Carrying Case with Foam Insert …….... Triplett PN: 10-4293
Male BNC to BNC Adaptor …………..... Triplett PN: 13838
Also Available:
BNC to Alligator Clip Lead .................... Triplett PN: 79-792