Triplett WireMaster Coax BNC – PN: 3274 - Manual (Page 4)

4
Specifications
• Identifies 8 individual Remotes by measuring their precision resistance
• AC and DC test detects voltages above 3 volts
• Display: Bright Red and Green LEDs indicate the test results
• Protected against damage up to 120 volts AC/DC (no fuse required)
• Minimum cable length: no minimum
• Maximum cable length: any length whose total DC resistance is less than 200 Ohms
(see table)
• Cables / Wires Tested: Any pair whose total DC resistance is less than 200 Ohms, and
is unconnected to other equipment or circuitry
• Continuity: Continuity (SHORT) is indicated for resistances of 500 Ohms or less
• OPEN Test: OPEN is indicated for resistances of 10,000 Ohms or more
• Battery: 9 volt
• Battery Life: approx 20 hours continuous use (alkaline battery)
• Size:
Main Unit: 2.45" W x 4.5" H (to top of BNC) x 1.25" T (to top of switch)
Remote: 0.5” W x 1.25” H
• Weight: Main Unit (with battery): 4.6 oz.
Complete Kit: 11.8 oz.
Note:
The WireMaster Coax will not map cables if any of the following devices are in use:
• Amplifiers
• Electronic Switches
• Attenuators • Matching Transformers
• Baluns • Modulators
• DC Blockers • Power Dividers
• Directional Taps • Splitters (non power passive)