Triplett WireMaster Coax BNC – PN: 3274 User Manual
Page 3
3
Introduction
The Triplett Wiremaster Coax is an 8 way Cable Mapper, with built-in Continuity beeper,
and 120VAC line cross protection. BNC connectors on the Main Unit and the Remotes
allow the user to attach to BNC cables or outlets, and due to the variety of off-the-shelf
BNC adapters, to numerous other connector families.
Warnings and Cautions
• The WireMaster Coax is not intended for use as a voltage detector. It only detects
voltage in order to perform its intended function, and to prevent accidental damage to
the product. i.e. while the WireMaster Coax detects the presence of 120VAC, it is not
safe while doing so. The product and its connectors are not appropriately insulated.
• In some situations, unconnected wires can “float up” to potentially dangerous volt-
ages and cause user injury. Treat any unknown wires as having dangerous voltage
present, and take the appropriate precautions.
• The overvoltage detection feature does not work with a low or dead battery. Conse-
quently, if the battery is low or dead, the WireMaster Coax will not warn the user that a
potentially dangerous voltage (i.e. 120VAC) is present. The WireMaster Coax is not
intended for use as a voltage detector.