Upsite 40002 Round 4 Rack Mount Grommet - Manual (Page 2)

2 Designer & Manufacturer
(888) 982-7800 www.upsite.com
Installation Guide
HotLok Round 4” Rack Mount Grommet
Tools and Preparation Required for Installation
Tools Required:
• Tool-less Installation if Proper Size Hole is Provided
• Hole Saw Cutting Tool and File (as necessary)
• Tape measure
Install Images
Dimensions and Cutting Requirements Inches Millimeters
Item No. 40002 - Overall size (diameter x height) 5.60” x .7” 142 x 18mm
Product height above the rack .40” 10mm
Maximum thickness of plate at rack install location .0625” 1.6mm
Hole cut required for installation 4.0 - 4.08” 101.6 - 103.6mm
Usable cable area 9.6 sq. inch 6194 sq. mm
1
2
3
1. Cut 4”/120mm
hole in the rack
top or side
2. Place grommet
half with male
tabs into 4” hole
3. Take grommet half with female
tabs and lower into hole until
the pins engage the male clips
4”/120mm
Male Clip