Denon AVR-3808CI - Manual (Page 55)


Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-Zone
Inf
or
mation
Tr
oubleshooting
Stopping playback temporarily
During playback, press ENTER.
Press again to resume playback.
To stop
During the play or pause mode, press and hold ENTER.
Searching up or down pages
Press [SEARCH], then press o (down) or p (up).
To cancel, press ui or [SEARCH].
Searching by fi rst letter (Character search)
This operation is convenient for choosing items from the menu screens
for Internet radio stations or fi les stored on the computer.
q
When the menu screen is displayed, press [SEARCH] twice.
w Use o p to select the fi rst letter you want to search for.
If there are multiple items starting with the selected letter, they are
displayed in alphabetical order.
If it is not possible to search the list, “Unsorted list...” is displayed.
• Use the RESTORER mode to expand the low and high frequency
components of compressed audio fi les and achieve a richer sound.
The default setting is “Mode3”.
• The time for which the GUI menus are displayed can be set at GUI
menu “Manual Setup” – “Option Setup” – “GUI” – “NET/USB”
(vpage 34).
• The display can be switched between the artist name, track name,
album name.
ENTER
<SOURCE SELECT> uiop
[NET/USB]
[ NET/DTU]
uiop
ENTER
[SEARCH]
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
1
Make the necessary preparations.
q Check the network environment, then turn on the AVR-3808CI’s
power. (vpage 20 “Network Audio”)
w If settings are required, make the network settings.
(vpage 31, 32 “Network Setup”)
e Prepare the computer. (vComputer’s operating instructions)
Install “Windows Media Player ver. 11”.
2
Either turn <SOURCE SELECT> or press [NET/USB]
(AMP mode) to select “NET/USB”.
: “Source Select” –“NET/USB” –“Play”
(vpage 37)
3
To operate using the main remote control unit, set
the remote control unit to the NET/DTU (DEVICE 1)
mode.
(vpage 59 “Remote Control Unit Operations”)
4
Use ui to select the menu, then press ENTER or p
to select the fi le you want to play.
5
Press ENTER or p .
Playback starts.
Basic Operation
Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-Zone
Inf
or
mation
Tr
oubleshooting
• There are many Internet radio stations on the Internet, and the
quality of the programs they broadcast as well as the bit rate of the
tracks varies widely.
Generally, the higher the bit rate, the higher the sound quality, but
depending on the communication lines and server traffi c, the music
or audio signals being streamed may be interrupted.
Inversely, lower bit rates mean a lower sound quality but less
tendency for the sound to be interrupted.
• “Server Full” or “Connection Down” is displayed if the station is
busy or not broadcasting.
• On the AVR-3808CI, folder and fi le names can be displayed as
titles. Any characters that cannot be displayed are replaced with “ .
(period)”.
1
Use ui to select “Internet Radio”, then press ENTER
or p .
2
Use ui to select the item you want to play, then
press ENTER or p .
The station list is displayed.
3
Use ui to select the station, then press ENTER or
p .
Playback starts once buffering reaches “100%”.
Listening to Internet Radio
Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-Zone
Inf
or
mation
Tr
oubleshooting
(DEVICE1 mode)
(AMP mode)