Viante CUC-26PM Pasta Perfetto Quick Guide - Manual (Page 8)

he various components need to be assembled in the following
order:
Introduce the extrusion chamber sideways into the machine and push firmly until it “clicks” into place. Then
make sure the plastic slide it’s inserted and in the closed position (all the way in).
Place the mixing bowl from above and push down until it’s secured in its place.
Place the mixing blade on the metal shaft and push down until it’s it reaches the bottom. Fasten it into place
using the fastening bolt provided.
Introduce the extrusion screw in the extrusion chamber from the front opening until it’s deep in its place.
Chose the pasta die you want to use and place it on the opening.
Use the metal washer to secure the pasta die by screwing it around the extrusion chamber front opening.
Use the fastening tool to tighten it (you can also do it by hand).
Put the lid on the product.
T
1
2
3
4
5
6