Vir2 Instruments MOJO - Manual (Page 13)

CHAPTER 0
2 /
USING WITH K
ONT
AK
T
09
USING KONTAKT AS AN AUDIOUNIT PLUG-IN IN LOGIC PRO,
LOGIC STUDIO, LOGIC EXPRESS, ETC.
Users of Apple’s Logic can use Kontakt as an AudioUnit plug-in.
These instructions have been prepared in Logic Pro 8, although
Kontakt may also work in earlier versions if the computer meets
the system requirements.
Once inside your Logic project, go to the Track mini-menu (in the
central area of your screen) and choose Track > New...
> [ 04 ]
The New Tracks dialog box will appear. Make sure Soft-ware
Instrument is selected, then click Create.
> [ 05 ]
The new instrument track will be created. On the left side of the
screen you will see the channel strip for that channel, including a
fader, pan knob, and various insert slots. Locate the blank slot
just below the letters “I/O” and above the output pair:
> [ 06 ]
Click there, and a list of plug-ins will appear. Choose AU
Instruments > Native Instruments > Kontakt 3 > Stereo.
> [ 07 ]
The Kontakt window will appear, and a MIDI track will be created,
transmitting to Kontakt’s MIDI channel A-1. When it is record-en-
abled, it will send any incoming MIDI played on your controller
into Kontakt.
At this point, you can skip down in the instructions
to the Getting Started With MOJO section below.
04
05
07
06