Visara CNA-8000 Installation - Manual (Page 53)

CNA-8000 Installation and Configuration
707158-003 3-11
Connecting a TN3270E Client to a Session Pool
There are several ways to connect a TN3270E client to a session pulled from a session
pool. These methods can be used.
 Using Client IP Address (not recommended)
 Use Listening Port
 Using Predefined Format
 Using a Nickname
 Client Subnet Address
 Selected from a Menu Presented to the Client
Here is a summary of what needs to be done for each of the methods.
Using Client IP Address:
This would be a tedious way to configure a user to get a session from a pool and would
not be the recommended way to do it.
Panel Action
Ports
One port configured for many clients
Pools Create as many different pools as needed.
Clients Specify the port configured on the ports panel.
Specify the client’s IP address in the address field.
Specify the Pool assignment in the Resource field.
Nicknames Not Required
User IDs Not Required
Using Listening Port:
Panel Action
Ports
One listening port configured for each pool that will be defined.
Pools Create as many different pools as needed.
Clients Specify the port configured on the ports panel.
Specify the Pool assignment in the Resource field.
Nicknames Not Required
User IDs Not Required but Recommended