Chapter 6. ethernet gateway – Visara CNA-8000 Installation User Manual
Page 75
Advertising
CNA-8000 Installation and Configuration
707158-003
6-1
Chapter 6. Ethernet Gateway
Configuring Ethernet XCA LLC and DLSW Drops
The downstream side of the XCA circuits defined and assigned to subchannels on the
ESCON/FICON interface(s) must be defined to the Ethernet, Token Ring, and SDLC
network interfaces. To define the downstream portion of the XCA circuit to reside on
Ethernet, select Ethernet from the Connectivity Configuration menu.
The resulting panel should appear similar to the one shown below.
Advertising