Visara VI-5990 - Manual (Page 29)

VI-5990 Installation and Configuration Manual
707166-001 2-9
the VI-5990 will determine whether the destination can be reached through any of the
configured local subnets, and will only use the default gateway if the destination is not
reachable otherwise.
eth1-5 IP Address: Enter the IP address that you want the eth1-5 interfaces to use.
eth1-5 Netmask: Enter the subnet mask that you want the eth1-5 interfaces to use.
eh1-5 Gateway: Enter a value for a gateway that is accessible to this interface if one is
present and is to be used. Only the eth0 interface is a Default Gateway. Traffic routed to
this interface from a subnet other than the one defined will be sent responses through this
configured gateway.
Button Definitions
Submit: Saves the current information into the currently active configuration file for use
on the next boot of the platform.
Return: Returns back to the Configuration Menu panel.