Visara SCON-20L Configuration Manual User Manual
Page 106
10-6
707044-006
SCON-20L/22L/25L/28L Configuration Manual
Print Buffering and Presentation Storage
Presentation Space Storage memory is used to buffer a print from a display station
when the destination printer is busy at the time the print is initiated.
If Presentation Space memory is available when a display attempts a print, the display
data will be buffered and printed when the printer becomes available. If no PS memory
is available when a display attempts a print, the display will be inhibited (printer busy
symbol will be displayed) until the printer becomes available.
Determine the maximum number of print jobs which may be buffered from displays
at any point in time. Enter this number in the worksheet titled Presentation Space
Storage Memory Worksheet.
ASCII Setup
Presentation Space Storage memory is used to save a session’s screen image when the
session enters ASCII Host Setup Mode. If no Presentation Space memory is available
when an ASCII Host session enters Setup Mode, the session data will be lost. The
screen will be blank when the session exits Setup Mode.
Determine the maximum number of sessions which may be in ASCII Host Setup Mode
at any point in time. Enter this number in the worksheet titled Presentation Space Storage
Memory Worksheet.
ASCII Cut and Send
Presentation Space Storage memory is used to perform an ASCII Cut and Send Operation.
If no Presentation Space memory is available when an ASCII Host session attempts a
Cut and Send operation, the operation will result in an input inhibit condition.
Determine the maximum number of sessions which may be performing a Cut and Send
operation at once. Enter this number in the worksheet titled Presentation Space Storage
Memory Worksheet.