VXL Instruments Itona D Series Thin Client - Service Manual - Manual (Page 7)

3 Pedestal and Side Cover
2
Pedestal and Side Cover
Removing Pedestal and Side Cover
The procedure to remove the power adapter, pedestal and top cover of the client is explained in
this section.
To remove the pedestal and top cover:
1. Turn Off the power to the client.
2. Unplug and remove the power adapter at the rear end of the client.
3. Unlock and remove the pedestal as shown in Figure 2
Figure 2: Itona C Series
4. Using the star screwdriver (Item B in Figure 1) unscrew the 2 screws as shown in Figure
3.
Figure 3: Side Cover Screws