Watson-Marlow Bredel 10 - Manual (Page 14)

DESCRIPTION
14
4 DESCRIPTION
4.1 Identification of the product
4.1.1 Identification of the product
The hose pump can be identified based on the
identification plates or stickers on:
A:
Pump head
B: Gearbox
C: Electric motor
D: Pump hose
E: Frequency controller (option)
4.1.2 Identification of the pump
The identification plate on the pump head contains the
following data:
A:
Pump type
B: Serial number and rotor identification letter
1
C: Year of manufacture
4.1.3 Identification of the rotor
The rotor identification letter identifies which type of
rotor is mounted to the pump. The table below shows
the rotor identification letter and the article number of
the mounted rotor. Also refer to
11.5.3 .
1 For information on the rotor identification letter, refer
to
4.1.3 .
Letter Bredel 10 Bredel 15-20
blank no rotor no rotor
A 210103L 215103L