Watson-Marlow 621CC - Manual (Page 25)

Track re-location (close coupled AC motor gearboxes)
 Ensure that the track is clean.

Fit the track over the gearbox boss.

Align the track horizontally so that the location holes are aligned with the threaded
gearbox holes.

Tighten the four track retaining screws using a Number 2 Pozi-Driv screwdriver.

Re-connect the guard interlock controlled waste pipework if required.
Page 25 of 46 Watson-Marlow Bredel E-Manuals
21/12/2011 file://R:\staging\pdfs-global\m-621cc-gb-04.html