Watson-Marlow Qdos30 Universal - Manual (Page 28)

Watson-Marlow qdos30 Universal and Universal+ Pump User Manual 28
The pump is preset with operational parameters as shown in table below:
First-time start-up defaults
Flowrate
240ml/min Pump status Stopped
Calibration 4 ml/rev Flow unit ml/min
Backlight 30 minutes Pump tag WATSON-MARLOW
Auto restart Off
This then proceeds to the home screen.
The pump is now ready to operate according to the defaults listed above.
Note: The display background colour changes according to running state as follows:
• White background indicates pump stopped
• Blue background indicates pump running
• Red background indicates error or alarm
All operating parameters may be changed by means of key-presses (see Section
15 Pump operation on page 30).