Wavecom W-RCI (Remote Control) V8.7.0 - Manual (Page 67)

XML SDK V8.7.0 Remote Control Interface Sample Code

59
XML command samples
CONNECT TO CARD
<Message version="1.0">
<Command>
<Connect>
<Card serial-nr="0210125807"/>
</Connect>
</Command>
</Message>
GET STATUS
<Message version="1.0">
<Command>
<Get element="card status"/>
</Command>
</Message>
SET FFT
<Message version="1.0">
<Command>
<Set>
<ParameterList>
<Parameter name="code" value="hf-analysis-fft"/>
<Parameter name="modulation" value="fft"/>
<Parameter name="input" value="inp1"/>
<Parameter name="offset" value="0"/>
</ParameterList>
</Set>
</Command>
</Message>
SET BITSTREAM
<Message version="1.0">
<Command>
<Set>
<ParameterList>
<Parameter name="code" value="hf-analysis-bit-stream"/>
<Parameter name="modulation" value="ms"/>
<Parameter name="bandwidth" value="2800"/>
<Parameter name="auto-mode" value="on"/>
<Parameter name="input" value="inp1"/>
<Parameter name="offset" value="0"/>
</ParameterList>
</Set>
</Command>
</Message>
SET FFTs PER SECOND
<Message version="1.0">
<Command>
<Set>
<Configuration fft-intervall-per-second="0"/>
</Set>
</Command>
</Message>
GET METADATA FOR FEC-A
<Message version="1.0">
<Command>
<Get item="metadata" information="code" additional-information="fec-a"/>
</Command>
</Message>
GET METADATA CODELIST
<Message version="1.0">