Epson ELP-3000 - Manual (Page 11)

Rear projection
If you have a translucent screen, you can set up the projector for rear projection,
in which the projector sits behind the screen. To use the remote control with rear
projection, you need to purchase the optional lead wire and connect the remote
control directly to your computer.
Optional Accessories
To enhance your use of the projector, EPSON provides the following accessories:
l
Polarized screens designed specifically for use with the projector. They allow
you to project images in a bright, illuminated room, making it unnecessary to
dim lights to view the projected image. The polarized screen comes in two
sizes: 40” and 60” diagonal.
l
Carrying cases especially designed for the projector and its cables. Both a soft
and hard case are available.
l
Remote control lead wire, which allows you to directly connect the remote
control to the projector. This option enables you to use the remote control
when an object is blocking the path between the remote control and projector,
such as during rear projection when the screen is between the remote control
and the projector.
You can purchase these accessories from your ELP-3000 dealer or by calling
EPSON Accessories at (800) 873-7766.
X Introduction