Installing the software – Epson ELP-3000 User Manual
Page 33
The modem port is identifled by the following icon:
3. Connect the other end of the RS-232C cable to the PC’s RS-232C serial
connector or to the RS-232C adapter on your Macintosh.
The serial connector on your PC is a nine-pin male connector. It may be
labeled Serial, RS-232C, COM1, or something similar. If you have a 25-pin
serial connector, you need to obtain a
25-pin to 9-pin converter.
Installing the software
Two diskettes are provided with the kit: one for the Macintosh and one for the PC.
Use only the diskette appropriate for your platform. Each contains ELP Link and
the ELP Remote Programmer,
Before installing the software, exit any open programs. Insert the appropriate
diskette in a diskette drive. Then do the following:
l
Windows.™ Co to the Program Manager and choose Run from the File
menu. In the Command Line text box, type A: SETUP or B : SETUP as
appropriate. Choose OK. Then follow the onscreen instructions.
l
Macintosh Double-click on the ELP Installer icon and follow the onscreen
instructions.
16
1
l
Installation