Epson ELP-3000 - Manual (Page 56)

40
Options menu
Prompt
Backgrnd
serial
Power Save
Delay On
3
l
Using the Menus
Temporarily displays a prompt on the projector screen to
identify which source (computer or video) is providing
the image. This prompt appears only when you switch the
image source.
Specifies what is shown onscreen when an image signal
is not available. The options are Test Pattern (default),
Black, or Blue.
Enables communication between your computer and the
projector. See Chapter 4 for more information.
Specifies in minutes how long the projector waits for an
image signal before entering standby mode. If an image
signal is not received within the specified time, the
projector automatically enters standby mode.
Power Save can be 5 to 60 minutes. The default is 10.
Automatically places the projector in standby mode when
it is turned on. By default Delay On is off.