Westermo MCW-211 User Manual
Page 15
Advertising
15
6645-2204
To be observe when the DIP-switches will be configured
… Speed and duplex setting only valid when auto-negotiation is disabled.
… If auto-negotiation and auto MDI/MDI-X disabled the TX ports supports
MDI-X configuration.
Configuration
DIP switches are accessible under the lid on top of the unit. DIP switches are used to
configure the unit.
DIP-switch settings
Before DIP-switch settings:
Prevent damage to internal electronics from electrostatic discharges (ESD)
by discharging your body to a grounding point (e.g. use of wrist strap).
NOTE DIP-switch alterations are only effective after a power on.
!
Advertising