Westermo MR-200 - Manual (Page 16)

16 6615-2202
Configuration by Web Tool
The MR-2xx includes an easy-to-use Web configuration tool. The Web tool is very
intuitive and includes useful help information for the configurable parameters.
Connect and login to the MR-2xx on the default IP address and with default username
and password combination (or your customized if configured) using a standard Web
browser.
Basic GPRS/3G setup
The following setup must be done to get basic GPRS connectivity.
PPP Account
Username: If your GPRS provider supplied one
Password: If your GPRS provider supplied one
GPRS/3G Module
APN:
Access Point Name from your provider goes here
Press Save then press OK
Press Reboot then press Reboot
The settings must be saved to one of the two profiles and then restarted.
When the router is restarted it will make a connection to the GPRS-network and it
should be possible to browse the Internet from the connected computer.
Note: The Gateway and DNS address must be set on the computer to the IP address of
the router.
Network status
Status of the GSM-interface can be found in the menu GPRS-module.
Status of the PPP-interface and IP-address in the GPRS-network can be found in the menu PPP.