Factory default reset switch – Westermo MRD-310 User Manual
Page 15
15
6623-2201
Figure 3
Factory default reset switch
Factory Default Reset Switch
The reset switch is used to restore the configuration of the MRD-310 to factory default
settings. The switch is accessed through a small hole on the rear of the unit adjacent to
the power connector, refer to figure 3.
To reset the configuration:
• Power down the unit.
• Using a suitable tool depress the reset switch.
• Power up the unit ensuring the switch remains depressed for approximately 5 seconds
after power is applied.
• The modem will now re-boot as normal with the factory default settings.
Note: Using the Factory Default Reset Switch will erase all existing configuration
settings and restore the factory default settings. This includes the network
connection profile settings APN, user name and password.