Widex SCOLA TALK - Manual (Page 16)

16
Connecting audio equipment
The audio cord provided is used to connect the SCO-
LA TALK to audio equipment (e.g. TV and radio). Plug
the audio cord directly into the headphone jack of the
audio equipment. Plug the other end of the audio cord
into the audio jack of the SCOLA TALK. If the SCOLA
TALK is off, it will automatically turn on when you con-
nect it to the audio equipment, if the audio signal level
is sufficiently high.
The sound signal volume can usually be adjusted us-
ing the volume control of the audio equipment. If the
signal from the audio equipment is too weak, the SCO-
LA TALK will automatically turn off after five minutes.
To prevent this from happening, you must increase
the volume on the audio equipment, or set the SCOLA
TALK in the
(omnidirectional) setting, which will
switch on SCOLA TALK’s own microphone. In the two
other settings, the audio input function is deactivated.
Other connection possibilities include SCART (e.g. for
TV or video) and phono plugs (e.g. for hi-fi).