Widex SCOLA TALK - Manual (Page 18)

18
Channel selection
Channel selection button
In the SCOLA TALK display you can see the current
FM transmitting channel . The channels selected for
the SCOLA receiver and for SCOLA TALK must be
the same in order for the system to work .
When the SCOLA TALK is switched on, the display
shows the current FM transmitting channel. Your
SCOLA TALK is preset to use the same channel as the
SCOLA receiver. The channel selection button should
only be used in cases where there is a mismatch be-
tween the two channels, or if there is interference on
the channel. You can press the channel selection but-
ton using a pen, or the like.
You can also select another channel (both on the SCOLA
receiver and SCOLA TALK) if there is interference on the
starting channel.
NOTE
Note that what is being tranmitted from the SCOLA TALK could
possibly be picked up by another FM system .