ZeeVee ZvSTB Control for Set Top Boxes (QAM & DVB-T/C) - Manual (Page 2)

2 w w w . z e e v e e . c o m
U S I N G Z v S T B C O N T R O L F O R S E T T O P B O X E S
Configuring Maestro for set top box management
After configuring the set top box, use Maestro to specify options for managing the units.
1. Connect to Maestro by entering the IP address in the browser.
2. Click the STB tab to navigate to the set top box configuration and control page.
3. Set the IP address of the given set top box in the IP Address field of the STB Device
section. Once entered, click Apply and the page refreshes with the appropriate data from
the set top box (for example, Receiver ID and status information). To view and manage
individual set top box units, you need to enter the proper IP address for the given box in
its associated input field.
If an IP address is not present in the STB IP Address field for a given input, the ZeeVee unit does
not enable remote management operations.
The fields on the STB tab
page all contain values that
live on the ZeeVee unit.
The Call Sign Name, Program Name, Receiver ID, and
Access Card values are all updated and displayed at
regular intervals. These are informational and helpful
to determine which STB is connected.