ZeeVee ZvPro 280 - Manual (Page 5)

ZvPro 280 www.zeevee.com
Page 5 of 8
ZvPRO280_GGG_v1
Basic Installation
Factory default settings in the product allow ZvPro 280 to broadcast a component HD source with
analog audio on channel 2.1, over coax cabling, for reception at connected HDTVs.
1. Plug ZvPro 280 power cord into AC outlet.
2. Connect Component Video output of HD source to Component Video Input of ZvPro 280.
3. Connect L/R analog audio output of HD source to L/R analog audio input of ZvPro 280.*
4. Connect coaxial output of ZvPro 280 to HDTV RF Input.
5. Tune HDTV to channel 2.1 to view Zv channel.
*Default audio input is L/R analog.
For information on customizing ZvPro for alternative audio inputs, changing RF output channel, etc., go
to
http://www.zeevee.com/configuration and download the ZvConfig utility.
Important: ZeeVee regularly makes improvements to video and audio quality, and overall functionality.
Always check for updated firmware for your ZvBox before deploying the unit. This is done in the
ZvConfig utility.