ZeeVee ZvPro 250 - Manual (Page 5)

ZvPro 250 www.zeevee.com
Page 5 of 8
ZvPRO250_GGG_v3_6
Basic Installation
Factory default settings in the product allow ZvPro 250 to broadcast a component HD source with
analog audio on channel 2.1, over coax cabling, for reception at connected HDTVs.
1. Plug ZvPro 250 power cord into AC outlet.
2. Connect Component Video output of HD source to Component Video Input of ZvPro 250.
3. Connect L/R analog audio output of HD source to L/R analog audio input of ZvPro 250.*
4. Connect coaxial output of ZvPro 250 to HDTV RF Input.
5. Tune HDTV to channel 2.1 to view Zv channel.
*Default audio input is L/R analog.
For information on customizing ZvPro for alternative audio inputs, changing RF output channel, etc., go
to
www.zeevee.com/support and view or download the ZvCli User Manual and the ZvCli application.
Important: ZeeVee regularly makes improvements to video and audio quality, and overall functionality.
Always check for updated firmware for your ZvBox before deploying the unit. This is done by using the
“download check” command in ZvCli.