ACTi Outdoor Dome on Tilted Wall - Manual (Page 10)

www.acti.com
Installation Guide
10
6. Screw the conduit gland body to the conduit hole of the camera.
Attach to Side Conduit Hole Attach to Bottom Conduit Hole
7. If the cable will be routed along the wall, skip to step 8.
If the cable will pass through the wall , do the following:
a. Pull the network cable and other cables (if any) through the bottom conduit hole.
b. Insert the sealing nut into the conduit gland body and then attach the clamping nut to
complete the cable solution.
or