ACTi Outdoor Dome on Straight Wall with Accessory Sets - Manual (Page 37)

www.acti.com
Installation Guide
37
Step 3: Install the Gooseneck
1. Route the flex conduit or network cable through the conduit hole on the wall.
2. Insert the flex conduit or network cable through the Gooseneck.
Using Flex Conduit Using Naked Cable
3. Attach the Gooseneck onto the wall using four (4) screws (not included in the package).
Optional: Add Extension Tube(s)
If the Gooseneck is not long enough, add one extension tube (purchased separately).
See Installing Extension Tubes on page 73.
or