Installation procedures, Step 1: prepare for installation, Step 2: attach the mounting plate – ACTi Indoor PTZ on Dropped Ceiling User Manual
Page 3
Advertising
Installation Guide
Installation Procedures
The camera package comes with a surface mount kit which allows the camera to be directly
installed onto a hard ceiling with flat surface.
Step 1: Prepare for Installation
1.
Using the mount drill template, mark the screw holes on the ceiling, then drill the holes and
insert the supplied plastic plugs.
2.
Push at the marked points below to detach the cover ring from the metal plate.
Step 2: Attach the Mounting Plate
Attach the mounting plate to the ceiling using the three (3) supplied screws.
Advertising
This manual is related to the following products: