ACTi E31 - Manual (Page 22)

www.acti.com
Hardware Manual
22
5. Tighten the sealing nut. Make sure the rubber is tightly squeezed to avoid
possible water leak.
NOTES on using Ethernet cables: When replacing the pre-installed network cable, it is
recommended to use exterior-grade Ethernet cables (CAT5/CAT5e/CAT6); ordinary
Ethernet cables are only designed for indoor use and may deteriorate quickly when
exposed to outdoor elements. Exterior-grade Ethernet cables are waterproof and do not
require a conduit.
Rubber must be
squeezed tightly