Epson S5U1C62000A - Manual (Page 164)

152 EPSON S5U1C62000A MANUAL
(S1C60/62 FAMILY ASSEMBLER PACKAGE)
CHAPTER 9: DEBUGGER
It is possible to specify a search condition and display the trace information that matches a specified
condition.
The search condition can be selected from the following three:
1. Program's execution address
2. Address from which data is read
3. Address to which data is written
When the above condition and one address are specified, the system starts searching. When the trace
information that matches the specified condition is found, the system displays the found data in the
[Trace] window (or in the [Command] window if the [Trace] window is closed).
Table 9.8.6.3 Command/menu item to search trace information
Function Command Menu
Search trace information ts [Trace | Trace Search...]
Saving trace information
After the trace information is displayed in the [Trace] window using the td or ts commands, the trace
information within the specified range can be saved to a file.
Table 9.8.6.4 Command/menu item to save trace information
Function Command Menu
Save trace information tf [Trace | Trace File...]