Epson S5U1C62000A - Manual (Page 229)

S5U1C62000A MANUAL EPSON 217
(S1C60/62 FAMILY ASSEMBLER PACKAGE)
CHAPTER 9: DEBUGGER
tim
(time or step mode)
Function
This command selects a measurement mode of the execution counter during target program execution
by the g (go) or gr (go after reset) command. Either execution time count mode or step count mode
can be selected.
Format
>tim
↵
(direct input mode)
Example
>tim
↵
Set step count mode. ... This command toggles the measurement mode.
>tim
↵
Set real time count mode.
>
Note
The execution time count mode is set at power on by default.
GUI utility
[Option | Mode Setting…] menu item
When this menu item is selected, a dialog box appears allowing selection of a measurement mode.
Use the radio buttons for this selection.