On network without dhcp server (default ip) – ACTi Camera User Manual
Page 3
On Network without DHCP Server (Default IP)
1. If necessary, configure the IP settings of your PC to match with the
network segment of the Camera.
2. Open a web browser and type
192.168.0.100
on the URL address bar.
The
Web Configurator appears. Login to access the Camera.
Camera Defaults
IP Address:
192.168.0.
100
Subnet:
255.255.255.
0
PC can be assigned with
IP Address (different
from Camera)
Example:
192.168.0.
99
Subnet (same with Camera):
255.255.255.
0
How to configure the PC IP address?
Click
Start > Control Panel > Network and Sharing Center >
Change adapter settings. Then follow the steps below:
1
2
3
4
Note: For full functionality, it is recommended to use Microsoft Internet Explorer
®
.
When using non-IE browsers, free 3
rd
party software plug-ins may be required.
Refer to the device Firmware Manual for more information.