Physical description – ACTi E11 User Manual
Page 8
Hardware Manual
Physical Description
1) Built-in Microphone
2) Audio Output
The IP device supports audio output with earphone jack
3) Reset Button
Step 1:
Press and continue to hold the Reset Button for 15 seconds (with a sharp tipped object,
like a pen.) after the unit has successfully completed the boot process.
Step 2:
The Ethernet LED light will turn off for about 1~2 seconds and flash on for another
second. By this time the reset to default operation is already completed. You may then
release the reset button. This length of time fluctuates slightly with the environment. The unit
will come back on and stay on after a few more seconds. The unit will start up with factory
default settings automatically.
4) Ethernet Port
The IP device connects to the Ethernet via a standard RJ45 connector. Supporting NWAY, this
IP device can auto detect the speed of local network segment (10Base-T/100Base-TX
Ethernet).