ACTi GNR-3000 V3.0.09 - Manual (Page 61)

www.acti.com
GNR-3000 System Administrator’s Manual
61
3. There are three ways to add devices into the
system, Search Devices, Search ONVIF
Devices, and Add Device Manually.
- Use Search Devices to auto search ACTi
cameras located in the same subnet as your
NVR server.
- Use Search ONVIF Devices to find devices
that support ONVIF in the same subnet as
your NVR server.
- If your cameras / video encoders are located
outside of a local subnet or over WAN, add
them to your NVR server by using the Add Device Manually button. You will need to know
the IP address of the device to add it manually.
Search Devices Within Local Area Network
1. Select “Search Devices”. Once the search is completed, a list of the devices in your LAN
will be shown. Click on the title header to sort by that column. Click on the header again to
sort in reverse order. For faster search, you may type a specific IP address or a part of the
IP address in IP Filter as a filter and click to narrow down the search result.
A. Account/Password text box B.
Tit
le
IP filter (for multiple networks)
C. “Refresh” button D. Available / Total Licensed Channels
E. Column title F. Search result
G. “Apply” button
C
A
G F
E
Available / Total Licensed Channels
D
B