AEC WD 350 through WD3000 Dehumidifying Dryers - Manual (Page 32)

Note: During normal operation, use this key to change the set point or alarm setting only. The
factory alarm setting is 25° above the set point and is satisfactory for most applications.
Down Key
The Down arrow key lets you lower the process air set point temperature. During setup, it lets
you decrease the value of the parameter displayed on the set point LED readout.
Up Key
The Up arrow key lets you raise the process air set point temperature. During setup, it lets you
increase the value of the parameter displayed on the set point LED readout.
WDMR and WDFR Series Dehumidifying Dryers Page 31