AEC VacTrac Series Conveying Systems - Manual (Page 49)

Page 48 12-Station Controllers VacTrac™ Conveying Systems
SET INPUT DELAY?
NO/YES
To exit from the Dump Delay menu and return to the Station
Settings menu:
„ Press the CLEAR key.
To save the new value and escape from the Dump Delay menu:
„ Press the ENTER key.
To save the new value to the controller memory and increment to
the next station in the sequence:
„ Press the SET key.
If you press the SET key without entering a value, the original
value is retained and the controller moves to the next station in the
sequence.
Set Input Delay, Station Settings Menu
The third submenu under Station Settings is the Set Input Delay
submenu.
To set input delay time:
„ Press the YES key.
The following screen displays.
The Input Delay function protects the system from erroneous
inputs caused by noise or mechanical vibration. The signal must be
present for the input delay time setting duration for the input to be
recognized.