AEC VacTrac Series Conveying Systems - Manual (Page 73)

Page 72 12-Station Controllers VacTrac™ Conveying Systems
OUTPUT CONTROL?
NO/YES
AUTOMATIC OR MANUAL?
N=AUTO Y=MANUAL
At the above message prompt:
„ Press the YES key to enter the Output Control menu.
The following screen displays.
To start the automatic cycle:
„ Press the NO key.
To increase speed:
„ Press the START/STOP key.
To decrease speed:
„ Press the SET key.
To exit the Output Control menu and turn all outputs OFF :
„ Press the CLEAR key.
!
CAUTION
Automatically cycling outputs with the pump in Active mode
can damage the conveying system.
Do not perform this action unless directed to do so
by the AEC Service Department.