AEC OFC Series - Manual (Page 28)

Page 28 OFC Series Extrusion Control Units
5-5 Electrical Connections
Refer to the proper AEC electrical drawing(s) depending upon the exact configuration,
as follows:
9 EWB-0531-01 Extruder/haul-off weight per length control (motorized pot)
9 EWB-0531-02 No pot; up/down relays only
9 EWB-0563 Updated version of EWB-0531-01
9 EWB-0563-01 Rate monitor only
9 EWB-0563-02 Haul-off weight per length control
9 EWB-0563-03 Extruder weight per length control
9 EWB-0563-04 Dual control
Figure 2
Sample OFC Electrical Schematics (EWB-0563), Drawing 1