AEC VacTrac Series Conveying Systems - Manual (Page 27)

VacTrac™ Series Conveying Systems Page 27
Mechanical Components WH2-605A.4
Figure 11
Typical Sequence T-Valve
Sequence T-Valves
Models SV1.5, SV2, SV2.25, SV2.5, SV3, SV4, SV4.5, SV5
• Mount in vacuum header piping above vacuum hoppers to
direct vacuum into hoppers.
• Used with VTPB pumps and critical dried resins because no
atmospheric air is introduced when vacuum is relieved.
• Compressed air operation.
• Selection of black or white neoprene plungers, or high
temperature silicone plungers.
• 24 VDC or 115 VAC control voltage solenoid.