AEC VacTrac Series Conveying Systems - Manual (Page 31)

Figure 10: SRC(2-16) Stainless Steel Vacuum Receiver Dimensions
Note: SRC16 Vacuum Receiver (shown)
( Mounting Flange -10” Diameter Cut-Out)
Dimensions (inches)
Model # Cu. ft. A B C D E F G H I J K
SRC02 0.2 16.75” 11.5” 9.75” 5.5”
SRC04 0.4 22.38” 17.5” 15.38” 11.5”
9.13”
SRC08 0.8 26” 20.13” 17.38” 11.6”
SRC16 1.6 32.25” 26.38” 23.63” 18.1”
12” 4”
14.13”
N / A 11” 10” 4.5”
(14.14)
SEE NOTE 5
(23.63)
(5.75)
K
J
Metric Standards • Dimensions in cm
Model # Liters A B C D E F G H I J K
SRC02 5.6 42.5 29.2 24.8 14.0
SRC04 11.3 56.8 44.4 39.7 29.2
SRC08 22.6 66.1 51.1 44.1 29.5
SRC16 45.3 81.9 67.0 60.0 46.1
30.5 10.2 35.9 N/A 27.9 25.4 11.4
5/16”/0.3125” (8.00 mm) -diameter holes, two (2) places equally spaced.
1/4”/0.2500” (6.35 mm) -diameter holes, six (6) places equally spaced; I is standard mounting hole location.
Conveying System Mechanical Components Chapter 2: Functional Description 30 of 136